High-temperature performance

The benefit of an all-metal design means the V6 can comfortably reach 285°C with the supplied thermistor. If you’d like to print at higher temperatures (up to 500°C) then you can simply swap the thermistor with a PT100 or thermocouple (may require additional electronics). This allows you to print standard materials such as PLA, PETG and ABS as well as high-temperature materials such as Polycarbonate, Ultem, Nylon and PEEK.

Easy to use

The V6 features a cartridge-style heater block, enabling a no-fuss approach to replacing both heater cartridges and temperature sensors. Replacement thermistors, PT100’s and thermocouples can be slid into place and secured with a grub screw, ensuring maintenance is simple and painless.

Precise

Our all-metal heatbreak maintains a sharp thermal break to provide better control over filament output; improving start and stops when extruding, as well as more effective retraction, combating oozing and stringing. The all-metal heatbreak features a refined internal surface finish to reduce extrusion force and improve the reliability of retractions.

Key features:

- All metal heatbreak

- Maximum temperature: 285ºC

- Cartridge style heater block 

- Groove mount

Default Kit includes:

- 1 x V6 heatsink 1.75mm or 2.85mm

- 1 x V6 heatbreak 1.75mm or 2.85mm

- 1 x V6 brass 0.4mm nozzle 1.75mm or 2.85mm

- 1 x V6 duct

- 1 x V6 aluminium heater block 

- 1 x Heater cartridge 12V or 24V

- 1 x Thermistor cartridge

- 1 x Thermistor extension cable

- 1 x 30 x 30 x 10 fan 12V or 24V

- 1 x Thermal compound

- 1 x V6 fixings kit

- 1 x V6 silicone sock

- 1 x PTFE tubing 100mm or 800mm

For more information visit: e3d-online.com/products/v6-all-metal-hotend